DC Transducer Screwdriver SMT-10SI

  • Lever Start, Push to Start, or Remote Start
  • Torque range:0.86 – 8.86 in-lbs
  • R.P.M: 100-980

Combining the SUMAKE SMT-10SI Transducer DC Screwdriver with the SMT-C1 intelligent controller empowers operators to monitor tightening progress, adjust tightening parameters (torque/thread/time), and transfer data through various methods. Users can seamlessly switch between multiple personalized programs with the SMT-10SI Transducer DC Screwdriver to accomplish diverse tightening tasks. This unit is effortlessly configurable and operable from either the panel, PC, or PLC.

By inputting a fastener’s profile into the system and associating it with a specific job, users gain full control over every aspect of the tightening process. For instance:

1. Torque Control: A customizable interface allows setting torque, turns, and timing limits based on the job and fastener.
2. Data Management: Integrated SD card module facilitates easy data logging, processing, or transfer without reliance on an internet connection or external module.
3. Rundown Control: Offers precise management of the rundown process, such as reaching a torque value and then reversing a designated number of turns.
4. Screw Counting: Associates a specific number of screws with an assembly job, ensuring all screws are inserted before proceeding to the next part.
5. Part Association: Enables tracking of fastener information at the assembly part level.
6. Remote Control: Allows remote initiation and cessation of the screwdriver via a computer or PLC, ideal for robot automation.
7. Security: Settings can be safeguarded using password and key features to prevent unauthorized adjustments.
8. PC Control: Operators can effortlessly configure and operate the system from either the panel or PC.

This adaptable system caters to various assembly applications and can be tailored to suit specific needs. Curious about its capabilities? Request more information today to discover the full potential of this tool.

  • Transducer Screwdriver:

    • Lever and Push to start
    • Full Auto Shut-Off clutch
    • LED Status Indicators (ok, error, etc.)
    • Temperature protection
    • Full traceability and error proofing capabilities
    • Comes with ESD Safe Housing
    • Ergonomic Soft Grip
    • SMT-C1 Smart Control Unit is Required 
    • One year Warranty
    • Brushless Motor (ideal for clean-rooms)
    • Excellent combination of power and ergonomic features
    • Reverse/forward switch

    Smart Controller: 

    • Intuitive user interface
    • Multiple programs and sequences for assembly job configurations 
    • Tracks vital tightening information at the job and part level
    • Input/Outputs allow for external control of the screwdriver
    • Easily integrated into a robot environment 
    • Input/Output Control Signals
    • Serial Port Control Communication/Interface
    • WiFi and LAN Control Communication/Interface

  • Power source: 40 VDC
  • Torque setting:  Stepless (set via user interface)
  • Torque range: 0.86-8.86 in-lb (1.02-10.2 kg-cm)
  • R.P.M:  100 - 980 (set via user interface)
  • Standard Torque Deviation: +-7%
  • Communication Protocols:  Input/output  signals,  Serial Port, Wi-Fi and LAN all supported!
  • Weight: 1.5 lb (680g)
  • Length: 11" (279.5mm)
  • Grip diameter: 1.6" (40mm)
  • CE certified

Electric Tool StandTool Stand
Spring Balancer SA-2207Spring Balancer
Transducer Screwdriver Clamp TA22050-25A-1
Transducerized ControllerSMT-C1
Certificate of CalibrationCertification of Calibration
Linear Torque Arm TA-22050BLinear Torque Arm TA-22050B
SMT-S1SMT-S1
SMT-S1-24SMT-S1-24
SMT-S1-24SMT-S1-30
Recoil cord assembly - 6 pin DC Cable (3m-8m)3M Transducer Power Cord Assembly EPAA50005-B6P-11
Recoil cord assembly - 6 pin DC Cable (3m-8m)5M Transducer Power Cord Assembly EPAA50005-B6P-11-1
Recoil cord assembly - 6 pin DC Cable (3m-8m)8M Transducer Power Cord Assembly EPAA50005-B6P-11-2